Complete Plants For Sale

Stock# 14191131

Used Hydrogen Plant, designed by Hydro-Chem (a Linde company), operates at a capacity of 2,266 Nm/hr (80,000 SCFH) and produces hydrogen with a purity of 99.99%. Built in 2004, the plant was engineered to use natural gas feedstock composed of 97.97% methane, 1.37% CO2, 2.49% N2, and 3.53% ethane. The hydrogen product maintains a 99.99% purity at a maximum temperature of 100F and a minimum discharge pressure of 200 psig. The syngas reformer utilizes a nickel catalyst. The plant equipment has been dismantled and is ready for quick shipment. Major equipment includes the Feed Heater (HX-101), Desulfurizer Vessel (V-101), Steam/Gas Lateral (SP-779), Reformer (R-101), Reformer Effluent Steam Generator (WH-104), Shift Converter (V-102), Shift Effluent Steam Generator (WH-105), Process Cooler (HX-104), Deaerator Exchanger (HX-103), Boiler Feed Water Exchangers (HX-102A & B), Deaerator (V-106), Steam Drum (V-107), Cold Condensate Separator (V-104), Flue Gas Steam Superheater (WH-101), Flue Gas Steam Generator (WH-102), Blowdown Drum (V-108), Economizer (WH-103), ID Fan (F-101), Cold Condensate Drum (V-104), Vent Gas Drum (V-105), and Adsorbers (A-101A through A-101D).

Stock# 48962019

Used 80MW Cogeneration Power Plant Incl. (2) GE Frame 6B Gas Turbine Generators, Natural Gas Fueled, 40MW each. (2) NEM Heat Recovery Steam Generator (67Bar @450C or 970psig @ 840F) systems, Complete with valves, pumps, sensors, and additional infrastructure. New year 2009. Maintenance History: Overhaul 1-TG4801- 06/2016; TG4851-09/2015 total firing hours 25000: Overhaul 2 -TG4801-05/2019, TG4851-09/2018 -total firing hours 50000: Overhaul 3 -TG4801 N/A; TG4851- 09/2021-total firing hours 75000.

Stock# 51308002

Used Rossi Catteli S.P.A, Parma, Italy Natural or Concentrated and Aseptic Filling Plant with a capacity up to 20 tonnes/hour of fresh fruits or tomato puree consisting of: (1) Puree extraction unit, (1) Concentrate unit, (1) Discharge section unit, (1) Sterilization unit, (1) Aseptic filling unit, (1) Wastewater treatment unit. Complete with piping, pumps, sensors, valves, platforms, steel structure, controls and additional infrastructure. New 2007.

Stock# 52857001

Used Crown Iron Works, Model 48, Milling Ring Flash Drying System. It was designed and used for food-grade orange pulp with 17,000 Lbs/Hr capacity but the plant can be used for a wide range of applications in various industries including: Drying food products such as grains, cereals, fruits, vegetables, herbs, and spices. Pharmaceutical ingredients, intermediates, and final products Drying various chemicals, including powders, granules, and crystalline materials Drying minerals and mining products such as ores, concentrates, and mineral powders Animal Feed Drying and processing environmental materials, such as sludges, biomass, and waste products. System designed for drying of powers, filter & centrifuge cakes, and slurries where a discrete and fine end product is desired. The Milling Flash Dryer is basically a low energy jet mill, that uses jets of low-pressure air to encourage inter particle collisions between pieces of feed material. These inter particle collisions break up the feed material in the dryer with no moving parts in the dryer or airstream. The dryer is in the shape of a torus, or donut that is broken up into 2 basic areas: (1) Manifold & Milling area; (2) Classifier. The ideal feed material for the Flash Dryer is a crumbly and free flowing cake that breaks up readily when it enters the drying air stream. The feed material enters the recirculating hot air upstream of the first nozzle, with the centrifugal forces generated by the air concentrating the material in the area above the nozzles. Particle-to-particle collisions begin immediately, deagglomerating the material before hard agglomerates can form. A tremendous amount of surface area is created allowing evaporation to occur quickly, thereby depressing air temperature in a very short period of time. Centrifugal forces are generated by the recirculating gases within the dryer, forcing the larger particles to the peripheral walls. Finer material is displaced towards the inside radius of the dryer where the classifier outlet is located. Fine product exits the dryer along with the exhaust gas vapor. Larger particles or agglomerates are recycled to the nozzle area dryer for further de-agglomeration and drying.

Stock# 53091007

Used Joule Thomson Effect, Refrigerated Joule Thomson Effect (J-T) Natural Gas Liquids Extraction Plant" Consisting of: Mol Sieve Dryer Skid and Accumulator/Economizer Skid: AND JT Skid with Liquid Separators: - 1,535 MBTU/HR Cold gas/ gas exchanger, 1200 PSIG Tube 720 PSIG Shell - High Pressure Cold Separator, 24" x 8, 1200 PSIG- Low Pressure Cold Separator, 30" x 10, 720 PSIG - Optimux 4 20 mA controllers, Rosemount guided wave level transmitters, Foxboro pressure and temperature transmitters - Accumulator, 36" x 8 300 PSIG - Economizer, 24" x 8 300 PSIG - Optimux 4 20 mA controllers, Rosemount guided wave level Transmitter, Foxboro pressure transmitters - 15,000 MCFD at = 10 lbs/MMSCF water inlet for 1 PPM water outlet - Inlet Coalescer: 16" x 76", 1200 PSIG, - Inlet Dryers: 42" x 116", 1200 PSIG - On skid PLC controlled 120 kW regeneration gas heater- 10 Micron dust filter, 1200 PSIG - Regeneration gas cooler and separator, 301 MBTU/HR, 250 PSIG - Optimux 4 20 mA controllers, Rosemount guided wave level transmitters, Foxboro pressure and flow transmitters-Electronic controlled, pneumatically operated AE switching valves AND Chiller kid - 2,119 MBTU/HR Warm gas/ gas exchanger, 1200 PSIG Tube 720 PSIG Shell- 949 MBTU/HR Chiller, 1200 PSIG Tube 300 PSIG Shell- Vaporizer, 300 PSIG - Optimux 4 20 mA controllers, Rosemount guided wave level transmitter, Foxboro pressure transmitter. Also includes Skid Mounted Gas Compressor 800 HP, 15 Foot Bore x 16 " Stroke, 300 to 400 rpm, with Harsco Model Ajax 108H Gas Cooler and DCL Model RCZ2110V14 Exhaust Muffler and Accessories. Delivery and Metering System to Include: ECI Battery Cabinet (2013) Hydra-Cell Model D10C9300002 , Explosion Proof Pump (2014), Micro Motion Midel CMF50M314N6BAEZZZ Mass Flow Meter (2014) Micro Motion Model CMF300M356N6BAEZZZ Mass Flow Meter (2014) with Assorted Piping nd Valves and Holding Tank, Liquid Controls Model ESAR/SP3 Flow Meters, (2014) Each with Digital Readouts and Accessories; (Readouts are Located in Office), Explostion Proof Pump, (2013) 20 HP. Explosion Proof Pump (2013) 20 HP, etc.

Stock# 53419001

Used Wax Solvent Recrystallization Unit. Design built by Plant Process Equipment, rated approximately 400 bbl./day. Skid mounted. All pressure vessels are National Board rated. Designed to 5% oil remaining in paraffin wax from a plastic to fuels facility. Major pieces of equipment include: - 8 scraped wall exchangers - 2 rotary drum filters - Ammonia refrigeration system - Fulton hot oil skid - 2 random packed stripper columns - Associated vessels, heat exchangers, pumps, instruments, etc. More information to come and upon request. Built 2020.

Stock# 52980001

Used Animal Protein Feed Line. Rated 3-5 tons per day. Consists of the following components: UAS model UFSP112X110D carbon steel hammermill, 350hp motor, dust collector. UAS hammermill, 150hp motor, dust collector. Fulton Model ISCS60 fuel-fired steam boiler natural gas, rated 2,070lbs per hour. Geelen counter flow Dryer-Cooler Type VD28X38J, 3-deck stainless steel, equipped with Maxon 2100kW natural gas burner model oven pak type EB-6, cyclone, dust collector, 60hp blower, control panel. Karl Schnell 225mm emulsifier. Stainless steel grinder. Dust collectors. Control panel. The plant was designed to process grains and animal byproducts to produce chicken feed protein. Silos are not included.

Stock# 53459005

Used Complete 153,000bpd Crude Oil Terminal Stabilization Plant consisting of: (1) Degasser Unit (Unit ID 9600) with Heat Transfer Unit, (1) Gas Plant (Unit ID 9400), (1) Liquified Gas Treating Unit (Unit ID 9330). Including piping, valves, safety equipment and additional infrastructure. Further details and technical documentation are available upon request.

Stock# 41174054

Used Rebuild ANHYDRO falling film vacuum evaporator. Complete ANHYDRO falling film vacuum evaporator with mechanical vapour recompression units Was originally designed as a TVR evaporator and in operation for milk concentration in a Norwegian dairy. This evaporator plant was relocated and redesigned by BONTECH A/S (Denmark) for 6.500 kg/hour water evaporation for stick water from fish industry and now operating with 2 units of mechanical vapour recovery units (MVR) in serial connection. The 5 calendria has a total of 121, 100, 38, 38 and 13 pipes - each ?51 mm and 7 meters long. It is complete with CIP plant and still installed. This plant is in excellent working condition and ready to be relocated and put back in operation, after reconditioning of pumps etc. The Westfalia separator is not included in this listing.

Stock# 54144001

Used Fishmeal Plant, 10 MT/Hour raw material intake consisting of: Infeed mill breaker, Atlas vertical cooker, Atlas screw press, Atlas disc dryer, Alfa Laval decanter, Flottweg Tricanter, 3 effect Evaporator, Cooling towers, Morisa Boilers, Conveying, Controls and additional infrastructure.

Stock# 51188006

Used Complete Lipids Production Plant. Consisting of: Modified Niro recirculating single effect evaporator (Ethanol extraction) operating in a semi-continuous manner. Alfa Laval Centri-therm Model CT6, 1.1kg(lb) per kg (lb) evaporated water, max concentrate viscosity 20,000cP, 11.5kW. Seitel Model SE13X centrifugal self-cleaning separator, sludge chamber capacity 1.7 liter, bowl speed 9600rpm, 5.5kW, max outlet pressure 4 bar, skimming capacity 2,000 liter, clarification & standardization capacity 3,000 liter per hour. CECO Rotary Sieve / Strainer Lipids filter tank. Page & Macrae Condenser vessel, shell rated 5 to 95 degrees C at -101.4 to 0 kPA, tube rated 24 to 35 degrees C at 0 to 500 kPa. Jacketed and single wall Stainless steel Tanks and Reactors, Heat Exchangers, Pumps, Valves, Controls. Bag Dump station & screw conveyor ancillary controls, and piping. Being sold as is, loaded on customers trucks. All motors are 50 cycles.

Stock# 14191087

Used Weatherly High Pressure Nitric Acid Plant, 500 STPD. Ran at 535 MTPD, turn down ratio 88%, Ammonia consumption 0.304. Includes the following equipment: Ingersoll-Rand 5-stage centrifugal air compressor, 49,453 SCFM (dry) at 14.7 psia and 60 degree F, Ingersoll-Rand E-4331 hot gas expander, Compressor train rebuilt in 1994. Installed new economizer, high-pressure intercooler, low-pressure intercooler, surface condenser, high pressure filter, Absorber column 12' diameter x 66' height, 18 absorption trays and 4 bleaching trays. New Cooler condenser (2003), new surface condenser (2005), new intercoolers (2006-2007), new waste heat boiler (2013).

Stock# 51077001

Used PESCO Oil Re-Refining Plant. Rated for 10,000 Gallons / 250 barrels per day of used Motor Oil and Diesel Oil. Plant includes: PESCO Re-refiner, 4 clay processors, fuel boiler, incinerator, two air compressors, and a water cooler. The plant is fully operational and is currently running. Plant produces 110 or 240 base stock. Year 2009.

Stock# 52984001

Used 20mW Steam Generating Power Plant with building and supporting structures. The plant includes: (1) WEG 2625Kva 11,000-volt synchronous continuous duty alternator (built 2012) (1) Triveni 20 mW steam bleed condensing turbine with gearbox (built 2012). The 20,000kW power rated steam turbine has inlet steam pressure of 40 bar and steam temperature of 400 degree C and a turbine speed of 6,150RPM. 21,800kW powered gearbox has an input speed of 6150RPM and output speed of 1,500rpm. The plant includes ACC vacuum condensing equipment, a RO water plant capable of 5000 Ltrs per hour, a condensate polishing plant and includes all ancillaries . This unit was commissioned in 2015, saw little use and is offered for sale in it's mothballed condition with the turbine bared regularly. Also available for sale as a complete package with the plant or as a separate purchase is an unused Triveni 20mW steam bleed condensing turbine with gearbox.

Stock# 48648004

Used Linde Engineering C3 splitter plant unit with a feed capacity of 14 tons/hr. of chemical grade propylene and 23 tons/hr. of refinery grade propylene. Equipment suits for polymer raisin production plants for PET/PP/HDPE/LDPE. New 2012

Stock# 53502001

Used Rentech Cross Flow Two Drum HRSG,(Heat Recovery Steam Generator), Evaporator, MAWP: 200 psig at 500 F, Tubes 700 F, Heating Surface: 24,471 sq. ft., Maximum Steaming Capacity: 31,500 lb/hr weighing 58,000 lbs, with dimensions 196 inches in length, 116 inches in width, and 178 inches in height. The second item is an Inlet Duct, weighing 5,850 lbs, with dimensions of 137 inches in length, 120 inches in width, and 132 inches in height. Other items listed include Boiler SL Parts, a Silencer weighing 658 lbs with dimensions of 78 inches by 32 inches by 45 inches, and a Stack Inlet Expansion Joint weighing 450 lbs with dimensions of 100 inches by 45 inches by 12 inches. Additionally, a Panel weighs 440 lbs and measures 65 inches by 44 inches by 54 inches. Piping Spools are listed as a legal load. The Economizer weighs 27,100 lbs with dimensions of 169 inches by 79 inches by 136 inches, and the Economizer Transition weighs 2,500 lbs with dimensions of 139 inches by 99 inches by 72 inches. Lastly, the Economizer Stack weighs 18,000 lbs and has dimensions of 552 inches in length, 65 inches in width, and 65 inches in height. Mfg. Serial No. 2015-43, Year Built: 2016

Stock# 53298008

Used Wastewater Treatment Plant 290 m/day MBR System with Ceramic Membrane & Bolted Steel Tank. (MBR) Mechanical Screening, Extended aeration, Dual KAESER CB130C air blowers), Cerafiltec MODULE 6.0 S BLACK Ceramic, MBR, CIP, Hallett 30 UV, Oilfield 12 skids (2 65 x 14 x 11) @, 600volt (transformer to 480). Treatment capacity 290 m ,Mechanical hand / off / auto switches, HMI (Allen Bradley Panelview 1500, Safety Rails, Catwalk, Fall Protection, Heating, Lighting. Comes with a 951 m bolted steel tank.